Contact
Pfaffenwaldring 7
70569 Stuttgart
Germany
Room: 3.104
Office Hours
by arrangement
- Farrokhabadi, A., Madadi, H., Naghdinasab, M., Rafie, A., Taghizadeh, S. A., Herráez, M. (2021). Micromechanical investigation of cross-ply carbon composite laminates with glass microtubes using CZM and XFEM. Mechanics of Advanced Materials and Structures. Doi: 10.1080/15376494.2021.1961177
- Rafie, A., Madadi, H., Farrokhabadi, A., Herráez, M. (2021). In situ strength analysis of cross-ply composite laminates containing defects and interleaved woven layer using a computational micromechanics approach. Fatigue & Fracture of Engineering Materials & Structures, 44, 1225-1240. Doi: 10.1111/ffe.13425
- Taghizadeh, S. A., Naghdinasab, M., Madadi, H., Farrokhabadi, A. (2021). Investigation of novel multi-layer sandwich panels under quasi-static indentation loading using experimental and numerical analyses. Thin-Walled Structures, 160. Doi: 10.1016/j.tws.2020.107326
- Farrokhabadi, A., Taghizadeh, S. A., Madadi, H., Norouzi, H., Ataei, A. (2020). Experimental and numerical analysis of novel multi-layer sandwich panels under three point bending load. Composite Structures, 250. Doi: 10.1016/j.compstruct.2020.112631
- Madadi, H., Naghdinasab, M., Farrokhabadi, A. (2020). Numerical investigation of matrix cracking propagation in cross-ply laminated composites subjected to three-point bending load using concurrent multiscale model. Fatigue & Fracture of Engineering Materials & Structures, 43, 1159-1169. Doi: 10.1111/ffe.13186
- Madadi, H., Farrokhabadi, A. (2018). Development a refined numerical model for evaluating the matrix cracking and induced delamination formation in cross-ply composite laminates. Composite Structures, 200, 12-24. Doi: 10.1016/j.compstruct.2018.05.096
- Naghdinasab, M., Farrokhabadi, A., Madadi, H. (2018). A numerical method to evaluate the material properties degradation in composite RVEs due to fiber-matrix debonding and induced matrix cracking. Finite Elements in Analysis and Design, 146, 84-95. Doi: 10.1016/j.finel.2018.04.008
2009 - 2014 | Bachelor studies in Aerospace Engineering at the Malek Ashtar University of Technology, Iran |
2014 - 2017 | Master studies in Mechanical Engineering at the Tarbiat Modares University, Teheran, Iran |
2017 - 2021 | research assistant in the department of Mechanical Engineering at the Tarbiat Modares University, Teheran, Iran |
since Sept. 2021 | doctoral researcher at the Institute of Applied Mechanics (MIB), Chair of Continuum Mechanics, University of Stuttgart, Germany |