2018
Modeling the swelling phenomena of lithium-ion battery cells based on a numerical chemo-mechanical coupled approach . Master Thesis (2018), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
2017
Numerical investigations on experiments for the characterization of magnetorheological elastomers. Bachelor Thesis (2017), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Prediction of Cracks During Forming of a Thin Bipolar Sheet of a Fuel-Cell. Master Thesis (2017), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Towards Topology Optimization in Magneto-Electro-Mechanics. Master Thesis (2017), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Charakterisierung der Dehnratenabhängigkeit thermoplastischer Polymere zur Finite-Elemente-Simulation von stoßartigen Belastungen. Master Thesis (2017), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Modellierung, Simulation und Optimierung eines ultraschallbasierten Messverfahrens in einem Fluid. Master Thesis (2017), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
2016
3D Dynamic Simulation of Concrete Hammer Drilling for SDSmax Using FEM. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
On Variational Principles in Electrostatics at Large Strain: A Comparative Study. Bachelor Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Efficient Computational Homogenization of Composites based on FE-FFT Coupling. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
FE-Analysis of a Wheel Assembly regarding Stresses of the Wheel Screws. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Crash Frame Design for Automotive High Voltage Battery Packs. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Phase Field Approaches to Topology Optimization. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Variational Framework of Porous Plasticity with Evolving Microstructure. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
A Micro-magnetic Approach For Large Deformation Magneto-Mechanically Coupled Material Response. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Computational Multi-scale Instability Analysis of Periodic EAP Composites in Finite Strains. Master Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
A Minimization Principle for the Modeling of Diffusion-Deformation Processes in Hydrogels. Bachelor Thesis (2016), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
2015
Numerical and experimental investigations on the reliability of passive components subjected to drop impacts. Master Thesis (2015), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Conforming FE-Implementation for Minimizer in Poro-Elasticity coupled with Fracture. Master Thesis (2015), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
2014
A finite deformation micromechanically motivated model for magneto rheological elastomers. Master Thesis (2014), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Coupled Thermomechanical Model for Gradient-Extended Dissipative Solids. Master Thesis (2014), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Modeling of Swelling-Induced Mechanical Instabilities in Polymeric Hydrogels. Bachelor Thesis (2014), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Variational Diffusion Coupled with Elasto-Dynamics and its Application to Simulate Hydrogels. Master Thesis (2014), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
A Phase Field Approach to the Fracture of Anisotropic Medium. Master Thesis (2014), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
2013
Discrete Network Models of Random Biopolymer Microstructures and Non-Woven Textiles. Bachelor Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
A Threephasic Phasefield Model for Austenite and Twinned Martensite in Shape Memory Alloys. Bachelor Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Coupled Thermoviscoelasticity of Rubbery Polymers in the Logarithmic Strain Space. Bachelor Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
A Phase Field Model of Twinning Induced Plasticity in Metal Crystals. Bachelor Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Configurational-Force-Driven Crack Propagation in Viscoelastic Solids. Bachelor Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Stability Analysis in Electro-Mechanics at Finite Strains. Master Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
A coupled model for the diffusion in polymeric gels undergoing large deformations. Master Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Multiscale Continuum Damage Model for Cavity Growth in Rubberlike Materials. Master Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.
Intercalation Induced Stress Generation in High Performance Lithium Ion Battery Systems. Master Thesis (2013), Institute of Applied Mechanics (CE), Chair I, University of Stuttgart.