This picture showsMatthias Ruf

Matthias Ruf

Scientific Staff
Institute of Applied Mechanics (CE)
Chair of Continuum Mechanics

Contact

+49 711 685-66619
+49 711 685-66347

Pfaffenwaldring 7
70569 Stuttgart
Germany
Room: 3.104

Office Hours

by arrangement

All pubilcations:
  1. Lissa, S., Ruf, M., Steeb, H., & Quintal, B. (2020). Effects of crack roughness on attenuation caused by squirt flow in Carrara marble. SEG Technical Program Expanded Abstracts 2020. https://doi.org/10.1190/segam2020-3427789.1
  2. Ruf, M., & Steeb, H. (2020). An open, modular, and flexible micro X-ray computed tomography system for research. Review of Scientific Instruments, 91(11), 113102. https://doi.org/10.1063/5.0019541
  3. Ruf, M., & Steeb, H. (2020). micro-XRCT data set of Carrara marble with artificially created crack network: slow cooling down from 600°C. DaRUS. https://doi.org/10.18419/DARUS-754
  4. Ruf, M., & Steeb, H. (2020). micro-XRCT data set of an in-situ flow experiment with an X-ray transparent flow cell. DaRUS. https://doi.org/10.18419/DARUS-691
  5. Ruf, M., & Steeb, H. (2020). micro-XRCT data set of Carrara marble with artificially created crack network: fast cooling down from 600°C. DaRUS. https://doi.org/10.18419/DARUS-682
  6. Hermann, S., Schneider, M., Flemisch, B., Frey, S., Iglezakis, D., Ruf, M., Schembera, B., Seeland, A., & Steeb, H. (2020). Datenmanagement im SFB 1313. https://doi.org/10.17192/BFDM.2020.1.8085
  7. Schepp, L. L., Ahrens, B., Balcewicz, M., Duda, M., Nehler, M., Osorno, M., Uribe, D., Steeb, H., Nigon, B., Stöckhert, F., Swanson, D. A., Siegert, M., Gurris, M., Saenger, E. H., & Ruf, M. (2020). Digital rock physics and laboratory considerations on a high-porosity volcanic rock: micro-XRCT data sets. DaRUS. https://doi.org/10.18419/DARUS-680
  8. Ruf, M., & Steeb, H. (2020). micro-XRCT data set of open-pored asphalt concrete. DaRUS. https://doi.org/10.18419/DARUS-639
  9. Page, M. A. M., Ruf, M., & Hartmann, S. (2018). Numerical modeling of the thickness dependence of zinc die-cast materials. Computational Mechanics, 62(4), 655--667. https://doi.org/10.1007/s00466-017-1519-8
  10. Ruf, M. (2017). Modellierung der Dickenabhängigkeit einer Zinkdruckguss-Legierung [Masterarbeit]. Technische Universität Clausthal.
  11. Martinez Page, M. A., Ruf, M., & Hartmann, S. (2017). Modeling and Simulation of the Thickness Dependence in Die Casting Structures. PAMM, 17(1), 449–450. https://doi.org/10.1002/pamm.201710194
  12. Ruf, M. (2014). Charakterisierung von faserverstärkten Halbzeugen aus recycelten Kohlenstofffasern für die Verwendung im Flugzeuginnenraum [Bachelorarbeit]. Hochschule für Angewandte Wissenschaften Hamburg.

Accompanied courses:

Summer term 2019 Technische Mechanik III: Energiemethoden der Elastostatik, Inkompressible Fluide und Dynamik von Starrkörpern
Winter term 2018/19 Technische Mechanik III: Energiemethoden der Elastostatik, Inkompressible Fluide und Dynamik von Starrkörpern
Summer term 2018 Technische Mechanik II: Einführung in die Elastostatik und Festigkeitslehre
 
 
since 01/2018 Research Assistant at the University of Stuttgart, Institute of Applied Mechanics (CE), Chair of Continuum Mechanics
05/2017-12/2017 Research Assistant at the University of Stuttgart, Institute of Aircraft Design
10/2014-02/2017 Master studies in Mechanical Engineering at Clausthal University of Technology
03/2014-08/2014 Internship and Bachelor's Thesis at Composite Technology Center (CTC) GmbH (an Airbus Company)
03/2011-10/2014 Bachelor studies in Aeronautical Engineering at Hamburg University of Applied Science
08/2009-03/2011 Paramedic at DRK Konstanz (ambulance and emergency rescue service)
07/2008-07/2009 Voluntary social year and paramedic training at DRK Konstanz (ambulance and emergency rescue service)
06/2008 Abitur at Nellenburg-Gymnasium Stockach
 
To the top of the page